selling This is a 3D Printed parts kit of Geralt's Steel Sword from The Witcher 3 (Game) and is made to order (SWORD ONLY). Color may vary depending on what plastic I have on hand as it is assumed you will be painting the assembled product.
Printed with ABS plastic.
Size: ~48 inches long.
Metal Parts:
Three 12" long 1/4" rods.
Two 8" long 1/8" rods.
Two 3.5" long 1/8" rods.
Four 4" long 1/8" rods.
*Note - 2 rods are pre-installed into the guard portion of the sword so that it will not break easily.
Parts can be glued together with super glue or epoxy.
This product can take ~1-2 week to prepare (3D print), depending on how many other orders I am currently processing.
I also run the parts through an acetone vapor bath to melt the print lines and make the parts smooth. This vastly cuts down on the amount of sanding needed by 75% or more. This does NOT mean that no sanding is required. I do recommend a light sanding with a high grit sand paper (220+) before priming to give the paint better adhesion.
Product code: Geralt's Steel Sword - Witcher 3 - 3D Printed selling Parts kit (Sword Only)